Avery ALS 256 User Manual download pdf (Page 18)

10/07 Rev. 2.1 USER MANUAL

LA-BO

Safety instructions

WARNING!

The applicator uses a large air flow to blow off the label which is held at

the bottom side of the applicator.

– Don’t look straight in to the vacuum grid of the running applicator,

to avoid that dust or label residues are blown into your eyes.

– When setting the applicator: make sure that the applicator cannot

be triggered unintentionally.

• When mounting, dismounting or servicing the LA-BO, make sure the

labelling head ALX 92x or ALS 20x/256 and the air pressure are switched

off!

• The operating air pressure must be at least 5 bars and no more than 6 bars.

• The applicator may only be assembled and commissioned by qualified

personnel.

• The applicator housing may only be opened by authorized technicians.

• Repairs to the applicator may only be performed by authorized technicians

who are aware of the risks involved!

• Check the applicator regularly for defective parts. Replace defective parts

immediately and only by original spare parts provided by the manufacturer.

By doing so, you avoid hazards caused by spare parts of low quality.

• The applicator construction must not be modified (e.g. by installing a larger

pneumatic valve). Unauthorized modifications, changes or improper usage

exclude all liability on the part of the manufacturer for damage resulting

there of.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 42 43

No comments

Avery ALS 256 User Manual Page 18