Avery ALS 230 User Manual download pdf (Page 43)

Operators Manual

ALS 230

Release 11/05 Page 41 Menu structure

5.3 Product menu

If parameters have to be changed because of different products and labels, the product menu

can be used. The machine offers a data bank in which 14 sets of data can be stored.

If you want to switch to a particular product, select one of the product numbers by pressing

NEXT or PRIOR and confirm with ENTER .The new parameters are valid now.

After switching to a new product bank the machine assumes the label roll has been changed or

that a parameter such as STOD is different and so requires an initialisation of the label position

at the dispensing edge. This is done by pressing the FEED key after loading a new product

bank at which time the machine will move the first detected label edge to the dispense position.

Note: If the FEED key is not pressed after loading a new product bank the first

detected label edge will be moved to the dispense position at the first signal from

the product sensor!

Note: The function FACT available in the configuration menu clears all the product

banks.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 84 85

No comments

Avery ALS 230 User Manual Page 43