5-2 Operator’s Handbook
Baud Rate
To change the setting, from the Main Menu select Setup, Port Settings, then
Serial Comm. If password protection in enabled, press Feed/Cut three
times, then press Enter/Pause before you see the Setup Menu options.
Then, follow these steps.
1. Press » or ¼ until you see
SERIAL COMM
Baud Rate ¼
2. Press Enter/Pause. The current setting is displayed, for example:
BAUD RATE
» 9600 ¼
Press » or ¼ to display the baud rate you need, then press Enter/Pause.
Press Escape/Clear until you see the Main Menu.
Word Length
To change the setting, from the Main Menu select Setup, Port Settings, then
Serial Comm. Then, follow these steps.
1. Press » or ¼ until you see
SERIAL COMM
» Word Length ¼
2. Press Enter/Pause. The current setting is displayed, for example:
WORD LENGTH
» 8
3. Press » or ¼ to display the word length you need, then press
Enter/Pause. Press Escape/Clear until you see the Main Menu.
Comments to this Manuals