4-6 Operator’s Handbook
Feed Mode
You can use continuous or on-demand printing. On-demand printing allows
you to remove a label before printing the next one.
To change the setting, from the Main Menu, select Setup, then Supply.
Then, follow these steps.
1. Press » or ¼ until you see
SUPPLY
» Feed Mode ¼
2. Press Enter/Pause to set the feed mode. The current setting is
displayed, for example:
FEED MODE
Continuous ¼
3. Press » or ¼ to see the other option. After you display the option you
want, press Enter/Pause. Press Escape/Clear until you see the Main
Menu.
Comments to this Manuals